PIC12CE518

High-Performance RISC CPU:
   • Only 33 single word instructions to learn
   • All instructions are single cycle (1 ms) except for program branches which are two-cycle
   • Operating speed: DC - 4 MHz clock input
                                  DC - 1 ms instruction cycle

   • 12-bit wide instructions
   • 8-bit wide data path
   • Special function hardware registers
   • Two-level deep hardware stack
   • Direct, indirect and relative addressing modes for data and instructions
Peripheral Features:
   • 8-bit real-time clock/counter (TMR0) with 8-bit programmable prescaler
   • 1,000,000 erase/write cycle EEPROM data memory
   • EEPROM data retention > 40 years
Special Microcontroller Features:
   • In-Circuit Serial Programming (ICSP™) of program memory (via two pins)
   • Internal 4 MHz RC oscillator with programmable calibration
   • Power-on Reset (POR)
   • Device Reset Timer (DRT)
   • Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
   • Programmable code-protection
   • Power saving SLEEP mode
   • Wake-up from SLEEP on pin change
   • Internal weak pull-ups on I/O pins
   • Internal pull-up on MCLR pin
   • Selectable oscillator options:
      - INTRC: Internal 4 MHz RC oscillator
      - EXTRC: External low-cost RC oscillator
      - XT: Standard crystal/resonator
      - LP: Power saving, low frequency crystal
CMOS Technology:
   • Low-power, high-speed CMOS EPROM/EEPROM technology
   • Fully static design
   • Wide temperature range:
      - Commercial: 0°C to +70°C
      - Industrial: -40°C to +85°C
      - Extended: -40°C to +125°C
   • Wide operating voltage range:
      -Commercial: 3.0V to 5.5V
      -Industrial: 3.0V to 5.5V
      -Extended: 4.5V to 5.5V
   • Low power consumption
      - < 2 mA typical @ 5V, 4 MHz
      - 15 mA typical @ 3V, 32 kHz
      - < 1 mA typical standby current