Search 
please enter your... :attiny31

C8051F588

C8051F588  50 MIPS, 128 kB Flash, 12-Bit ADC, 40-Pin Automotive MCU

C8051F588  Analog Peripherals
12-Bit ADC, 5 V input signal; up to 32 external inputs
- ±1 LSB INL; guaranteed monotonic
- Programmable throughput up to 200 ksps
- Data-dependent windowed interrupt generator
- Programmable gain maximizes input signal span
Built-in Temperature Sensor (±3 °C)
Three Comparators
Precision Internal Voltage Reference
VDD Monitor/Brown-out Detector
On-Chip Debug
- On-chip debug circuitry facilitates full speed, non-intrusive in-system
debug (no emulator required)
- Provides breakpoints, single stepping, watch-points
- Inspect/modify memory, registers, and stack
- Superior performance to emulation systems using ICE-chips, target
pods, and sockets
Temperature Range: –40 to +125 °C
Operating Voltage: 1.8 to 5.25 V

- Multiple power saving sleep and shutdown modes
Development Kit: C8051F580DK
High-Speed 8051 μC Core

- Pipelined instruction architecture; executes 70% of instructions in one or
two system clocks
- Up to 50 MIPS throughput
Memory
- 128 kB Flash; in-system programmable; flexible security features
- 8448 bytes data RAM (256 + 8 kB)
CAN 2.0B
- 32 message objects
LIN 2.1
- Master or slave operation using dedicated hardware
Digital Peripherals
- Up to 33 digital I/O; all are 5 V push-pull
- Hardware I2C, SPI™, and two UART serial ports available concurrently
- Two independent programmable 16-bit counter array with six capture/
compare modules
- Six general-purpose 16-bit counter/timers
- External Memory Interface (EMIF)
Clock Sources
- Internal programmable ±0.5% oscillator: Up to 50 MHz
- External oscillator: Crystal, RC, C, or CMOS Clock
Ordering Part Numbers
-C8051F588-IM, 40-Pin QFN (RoHS-compliant), 6 x 6 mm2