Search 
please enter your... :attiny31

C8051F360

C8051F360  100 MIPS, 16x16 MAC, 32 kB Flash, 10-Bit ADC, Mixed-Signal MCU

C8051F360  Analog Peripherals
10-Bit ADC
-Programmable throughput up to 200 ksps
-Up to 17 external inputs; programmable as single-ended or differential
-Reference from internal VREF, VDD, or external pin
-Internal or external start of conversion sources
-Built-in temperature sensor (±3 °C)
10-bit DAC (Current Mode)
Two Comparators
-Programmable hysteresis and response time
-Configurable to generate interrupts or reset
-Low current
On-Chip Debug
-On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (no emulator required)
-Provides breakpoints, single stepping, watchpoints
-Inspect/modify memory, registers, and stack
-Superior performance to emulation systems using ICE-chips, target pods, and sockets
Supply Voltage: 2.7 to 3.6 V
Temperature Range: –40 to +85 °C
High-Speed 8051 μC Core

-Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks
-Up to 100 MIPS throughput with 100 MHz system clock
-16 x 16 multiply/accumulate engine (2-cycle)
Memory
-1280 bytes data RAM with external memory I/F
-32 kB Flash; in-system programmable in 512 byte sectors (512 bytes are reserved)
Digital Peripherals
-39 port I/O; all are 5 V tolerant
-Hardware SMBus™ (I2C™ compatible), SPI™, and UART serial ports available concurrently
-Programmable 16-bit counter/timer array with six capture/compare modules, WDT
-4 general-purpose 16-bit counter/timers
-Real-time clock mode using PCA or timer and external clock source
Clock Sources
-Two internal oscillators:
- 24.5 MHz, 2% accuracy supports UART operation
- 80 kHz low frequency, low-power
-External oscillator: Crystal, RC, C, or Clock (1 or 2 pin modes)
-On-Chip programmable PLL: up to 100 MHz
Package
-48-pin TQFP
Ordering Part Number
-C8051F360-GQ